GOLDONI MY SPECIAL SR Series User Manual

OPERATING INSTRUCTIONS
The two - wheeled tractor is a self - propeller
agricultural machine with one axle, equipped with
a rotating soil - working unit.
These machines are used for preparing the soil
(breaking up the grassy turf, weeding, surface
cultivation) in places that cannot be reached by
tractors with larger implements. They are
therefore used for small areas, between the rows
in orchards, on the edge of ditched and in
confined spaces (greenhouses).
The machine consists of a bearing frame fitted
with an internal combustion engine that drives the
wheels, a PTO to which a cultivator with a
horizontal shaft is generally connected, but which
can also be connected to other tools (snow
ploughs, mowing bars, etc.).
The machine is controlled by an operator on the
ground, who steers it by means of a handlebar on
which most of the controls are installed.
All uses of the machine differing from
those described above are to be considered
unauthorized and dangerous.
INFORMATION ON THE MACHINE
Intended uses
Description
Engine
Driving wheels
Handlebars
GOLDONI S.p.A.
MY SPECIAL SR
EN Inglese
89
OPERATING INSTRUCTIONS

GOLDONI MY SPECIAL SR Series Specifications

General

Brand	GOLDONI
Model	MY SPECIAL SR Series
Category	Tractor
Language	English

Summary

Manufacturer and Model Information

Models and Versions

Lists the available models, MY SPECIAL 14 and MY SPECIAL 15.

Manufacturer Details

Provides contact details and location of the manufacturer, Goldoni S.p.A.

General Information

Introduction

Provides an overview of the manual's purpose and structure.

How to Read the Manual

Explains symbols, warnings, and how to interpret manual content for safe operation.

Manual Update and Copyright

Details information currency and ownership rights for the manual's content.

Standard Symbols

Lists and defines common symbols used throughout the manual for clarity.

Machine Identification

Identification Methods

Details how to identify the machine using decals, chassis marks, and metal plates.

Component Identification

Explains how main machine components are identified.

Safety

Safety Regulations

Outlines essential rules and precautions for safe machine operation and user protection.

Safety Operations

Covers training, preparation, and operational guidelines to prevent accidents and ensure safe use.

Hazard Avoidance

Advises on avoiding tip-overs, driveline entanglement, and other operational hazards.

Specific Safety Measures

Details safety for maintenance, fuel handling, fire prevention, clothing, tyres, and decals.

Safety Devices

Explains the machine's built-in safety features and their function.

Operating Instructions

Machine Overview and Controls

Describes intended uses, components, and provides an overview of controls and instruments.

Engine Start and Stop Procedures

Provides step-by-step instructions for safely starting and stopping the engine.

Handlebar and Transmission Operations

Guides on adjusting handlebars and operating the transmission and gears.

Brakes, PTO, and Towing Operations

Explains the operation of the braking system, power take-off, and towing attachments.

Technical Specifications

Engine and Transmission Specifications

Lists technical data for the engine, transmission, brakes, and PTO.

Dimensions, Weights, and Wheels

Presents physical characteristics, weights, and tyre specifications of the machine.

Speed and Noise/Vibration Data

Displays speed charts and information on noise and vibration levels.

Scheduled Servicing

Routine Maintenance Schedule

Outlines the recommended intervals and tasks for regular machine maintenance.

Engine Unit Servicing

Details procedures for checking and maintaining the engine oil and air filter.

Transmission and Electrical System Maintenance

Explains maintenance for the transmission, gearbox, and electrical system components.

Recommended Lubricants and Fluids

Lists approved lubricants and fluids for various machine components.

After Sales Service and Documentation

After Sales Support

Provides information on warranty, assistance, and ordering spare parts.

Declaration of Conformity

States the machine's compliance with relevant European directives and standards.