EasyManuals Logo
Home>Graco>Paint Sprayer>XM Series

Graco XM Series Repair Parts

Graco XM Series
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Proper Lifting of Sprayer
16 313289W
Proper Lifting of Sprayer
Lift Using a Forklift
Power must be off. Sprayer can be raised and moved
using a forklift. Carefully lift the sprayer; make sure it
balances evenly.
NOTE: If 25-gallon hoppers are installed, make sure the
forklift arms extend across the entire unit. The forklift
must approach from the front of the unit.
Lift Using a Hoist
Sprayer can also be lifted and moved using a hoist.
Connect a bridle swing, hooking an end to each of the
air motor lift rings. Hook the center ring to a hoist. See
the following figure. Carefully lift the sprayer; make sure
it balances evenly. Do not lift with 25 gallon hoppers
attached to the unit.
Follow instructions to avoid serious injury or damage
to equipment. Never lift with the hopper(s) filled.
NOTICE
To prevent spilling and to ensure even weight
distribution, drain all fluid prior to lifting th
proportioner.
WLD
WLE
2.0 ft (0.61 m)
minimum

Table of Contents

Other manuals for Graco XM Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco XM Series and is the answer not in the manual?

Graco XM Series Specifications

General IconGeneral
BrandGraco
ModelXM Series
CategoryPaint Sprayer
LanguageEnglish

Related product manuals