Overview
312359R 15
Overview
Usage
XM plural-component sprayers can mix and spray most
two-component epoxy and urethane protective coatings.
When using quick-setting materials (less than 10 minute
pot life) a remote mix manifold must be used.
The XM sprayer operates using compressed air
pressure. XM plural-component sprayers are operated
via the user interface, air controls, and fluid controls.
The hazardous location XM model variants feature an
intrinsically safe alternator powered by a compressed
air-fed turbine as a power supply. The alternator module
working pressure must be set to 18 +/- 1 psi (12.6 +/- 10
kPa, 1.26 +/- 0.07 bar).
Location
XM sprayers are not approved for use in hazardous
locations unless the base model, all accessories, all
kits, and all wiring meet local, state, and national
codes. See Models, page 9, to determine the
appropriate location for your particular sprayer model.
To Next Page
Loading...
Need help?
General
