Basic Operation
34 312359R
Set Maintenance Parameters
(Optional)
Prior to configuring system settings, follow Enable
Setup Screens, page 81, to ensure screens shown in
this section are viewable and configurable. If they are
not, follow instructions in Enable Setup Screens to
enable them.
For details regarding the user interface display screens
see User Interface Display, page 75.
To set maintenance parameters for pumps and valves,
including maintenance schedules, press from
the Home Setup screen.
Use the first screen to set maintenance setpoint
amounts for pumps and dosing valves. Use the second
screen to set the maintenance schedule for changing
the incoming air filter.
Set Maintenance Setpoints
To set maintenance setpoint values, press and
to move through each field, and press to
make a field selectable. Press to scroll through
each setpoint digit. Press and to scroll
through the optional values. Continue this process until
the desired setpoint is reached. Press to save
that setpoint.
Set Maintenance Schedule
To set the number of days between changing the
incoming air filter that will result in a reminder advisory,
press to move to the Maintenance Setup 2
screen. Press to make the field selectable. Press
to scroll through each digit, and press and
to scroll through the optional values. Press
to save the number of days value.
To Next Page
Loading...
Need help?
General
