36 / 81 EN
Television / User Manual
USB RECORDING
-------------------------------------------------------------------------------------------
Connecting external data media
Notes:
7
It is advised to put the television on stand-by
mode before connecting the External Data
medium.
7
Before disconnecting the external data me-
dium, the television must first be switched to
standby, otherwise files can be damaged.
7
There are two USB inputs on the television,
namely USB2 (HDD) and USB1.
USB2 (HDD) input is intended for USB
devices that require additional power (e.g.
external hard disk).
1 Plug the external hard disk to the USB2
(HDD) USB interface of the television.
or
plug the memory stick in one of the USB1
sockets of the television.
Notes:
7
USB1 port of the TV supports 500 mA
current according to the USB standard.
Devices such as external hard disk and etc.
that consume more power can only be con-
nected to the USB2 (HDD) USB interface
of the television.
7
If you are using a power cable for the
external hard disk that you have connected
to the USB2 (HDD) USB interface, then
the power cable of the external hard disk
must also be unplugged when the TV is
turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.
USB2
(HDD)
To Next Page
Loading...
Need help?
General