Television / User Manual
55 / 81 EN
HDMI CEC
Your television is equipped with
HDMI CEC feature. This feature
utilizes CEC (Consumer Elec-
tronics Control) protocol. CEC
allows you to make an HDMI
connection between your TV and DVD player,
STB or video recorder and control such equip-
ment with the remote control of the television.
This feature must be supported by the device
you connect as well.
Your television supports the following functions.
For detailed information about this function,
read the user manual of the external device.
HDMI CEC connection functions
of the television
Switching on the external device from
standby mode
If you switch on your external device (e.g. DVD
player) from standby mode, your television will
also be switched on from standby and switch
to the HDMI source that your television is con-
nected to.
Depending on the features of the external de-
vice (e.g. AV receiver) can start and your televi-
sion can stay on stand-by mode.
Selecting the HDMI source from the
television
When you switch on your external device (e.g.
DVD player), your television will switch to the
HDMI source that the external device is con-
nected to (your television must be on).
Selecting the menu language
When you select the menu language from your
television menu language of the external device
will change as well. (If your DVD player sup-
ports)
USING EXTERNAL DEVICES
---------------------------------------------------------------
Switching off the device from standby
mode
After switching your television to standby, your
external device (e.g. DVD player) will also
switch to standby if it is on.
Refer to the user manual of your external device
to learn how to activate this feature on it.
Searching and selecting the active
external device
1 Press »MENU« to open the menu.
2 Press »
V
« or »
Λ
« to select the »Preferenc-
es« menu and press »OK« to confirm.
3 Press »
V
« or »
Λ
« to select »HDMI Link«
and press »OK« to confirm.
4 Use »
<
« or »
>
« to set »HDMI Link« to
»On«.
5 Press »
V
« or »
Λ
« to select the »Device
List« and press »OK« to confirm.
– Existing devices will be searched and
displayed in the menu
6 Press »
V
« or »
Λ
« to select the device you
want to control and press »OK« to confirm.
7 Press »BACK
<
« to return to the previous
menu or press »EXIT« to end the setting.
To Next Page
Loading...
Need help?
General