14 / 81 EN
Television / User Manual
OVERVIEW
--------------------------------------------------------------------------------------------------------------
Control buttons on the TV
Buttons of the remote control
+V/P-
Turning on the television and
switching it to standby mode
1 Press 8/I to turn on the television in the
stand-by mode.
2 Press
8/I to switch the television to the
stand-by mode.
Adjusting the volume or chang-
ing the station
1 Use V/P button to select »Set to Audio Navi-
gation« or »Set to Channel Navigation«.
2 Press + to increase the volume/channel.
3 Press – to decrease the volume/channel.
7
SERVICE: Service only.
7
LAN: Network connection.
7
Optic Out: optical audio output.
7
USB2 (HDD): Data media such as an ex-
ternal hard disk to record programs will be
connected here.
7
HDMI3 (ARC): Input for digital audio and
image data.
7
HDMI2: Input for digital audio and image
data.
7
SATELLITE: Input for satellite antenna signal.
Suitable for single-cable SCR system.
7
ANT IN: For antenna cable (terrestrial an-
tenna or cable connection).
7
U: External audio output or headphone jack
with adapter.
7
USB 1: For data media and keyboard.
7
HDMI1: Input for digital audio and image
data.
7
CI: For CA modules for receiving scramble
channels.
To Next Page
Loading...
Need help?
General