66 / 81 EN
Television / User Manual
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Searching for digital television
channels from a satellite manu-
ally
If a certain channel cannot be found with
automatic search, you can search it manually
by manual search function. You must enter all
parameters of the channel correctly. You can
obtain the current transponder information from
teletext page, satellite TV magazines or Internet
or you can search by selecting from the tran-
sponder list that already exists in the TV.
1 Press »
« to open the »Source« menu.
2 Press »
<
« or »
>
« to select »DVB-S/S2« and
press »OK«.
3 Press »MENU« to open the menu.
4 Press »
V
« or »
Λ
« to select the »Channel«
menu and press »
>
« to confirm.
5 Press »
V
« or »
Λ
« to select »DTV Manual
Tuning« and press »OK« to confirm.
– »DTV Manual Tuning« menu will be
displayed.
6 Press »
V
« or »
Λ
« to select the required
items and press »OK« to confirm.
Frequency
Enter the 5-digit channel frequency using
»1...0«.
Symbol
Enter channel symbol rate with »1...0« as a
5-digit number.
Polarization
Press »
<
« or »
>
« to select channel polariza-
tion as »Vertical« or »Horizontal«.
7 Press »
V
« or »
Λ
« to select »Scan Mode«
and press »OK« to confirm.
Select »Free« for free channels only,
select »Scramble« for encrypted channels
only and select »Free+Scramble« for all
channels, and press »
V
« or »
Λ
«, press
»MENU« to return to the previous menu.
8 Press »
V
« or »
Λ
« to select »Service Type«.
Select »DTV« for TV channels only, select
»Radio« for radio channels only, and select
»DTV+Radio« for both by pressing »
V
« or
»
Λ
«.
Note:
7
If some of the frequencies are not stored
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Network Search«
option to »On«.
9 Select »Search« with »
V
« or »
Λ
« and
press »OK« to confirm.
10 Press »EXIT« to end searching.
To Next Page
Loading...
Need help?
General