10 / 81 EN
Television / User Manual
CONNECTION/PREPARATION
-----------------------------------------------------
Connecting the antenna and the power cable
1 To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
SATELLITE antenna socket on the television
set;
and / or
2a For terrestrial digital stations (DVB-T) plug
the cable of the rooftop, indoor antenna
(passive or active indoor antenna with its
own power supply) into the antenna socket
ANT IN on the television set;
or
2b For digital stations of the cable TV network
(DVB-C) plug the antenna cable into the
antenna socket ANT IN on the television
set;
or
2c For analogue stations plug the antenna
cable into the antenna socket ANT IN on
the television set.
Note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
3 Plug the mains cable into the wall socket.
Note:
7
Only plug the device into the mains socket
after you have connected the external
devices and the antenna.
7
Do not use an adapter plug or extension
cable which does not meet the applicable
safety standards. Do not tamper with the
power cable.
2
3
1
To Next Page
Loading...
Need help?
General