56 / 81 EN
Television / User Manual
USING EXTERNAL DEVICES
---------------------------------------------------------------
High definition – HD ready
Your television can playback high-definition
television signals (HDTV).
You can connect the input sources (HDTV set-
top box or High Definition DVD player) to the
»HDMI« socket (digital HDTV signal).
This ensures that you can view digital HDTV
programmes, even if they are copy-protected
(HDCP High Bandwidth Digital Content Protec-
tion).
HDMI, the HDMI logo and High-Definition Mul-
timedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Connection options
7
Which television socket(s) you connect your
external devices to depends on the sockets
the external device is equipped with and
the signals which are available.
7
Note that with many external devices
the resolution of the video signal must be
adapted to the input sockets on the televi-
sion (check the external device’s instruction
manual). You can find out which values you
need to set by referring to the guidelines in
the section about connection options.
7
Do not connect any other equipment while
the device is switched on. Switch off the
other equipment as well before connecting
it.
7
Only plug the device into the mains socket
after you have connected the external device.
Connecting an external device
ANT-INOptic Out SATELLITE
13/18V
max.500mA
HDMI2HDMI3(ARC)USB2
(HDD)
USB1 HDMI1 +V/P(M)-
SERVICE
To Next Page
Loading...
Need help?
General