HDE 16.05.2022 732.22.110
58
10.2 Complete reset
A complete reset resets the furniture lock to the factory settings. All data is cleared. The
furniture lock then has to be reconfigured
(
5. Commissioning, page 44.).
A complete reset is required in the following cases:
• Complete erasing of all data (e.g. in the event of return to stocks / warehouse).
• Resetting of software operation to stand-alone operation (SA).
11. Cleaning and maintenance
11.1 Cleaning
Clean outer surfaces of product if necessary:
• with a dry, soft cotton cloth, or
• with a damp cloth and a little washing-up liquid or neutral cleaner
Prerequisites:
A tool to actuate the reset button, such as a thin pen/pencil or
opened out paper clip
1. Press the reset button.
A brief acoustic signal is heard.
2. Press and hold the reset button until two long
acoustic signals are heard.
The LED flashes rapidly in green and red.
All data and access rights are cleared.
The lock switches to commissioning mode
(5. Commissioning, page 44)
ins-src-732.22.110_EFL.book Seite 58 Montag, 16. Mai 2022 9:28 09
ins-src-732.22.110_EFL - Kopie.pdf 58 16.05.2022 10:20:14
To Next Page
Loading...
Need help?
General
