Hardi COMMANDER Plus Series User Manual

Name: Hardi COMMANDER Plus Series
Brand: Hardi
Rating: 4 (1 reviews)

72 pages

To Next Page

To Previous Page

COMMANDER

HARDI

reserves the right to make changes in design,

material, or specification without notice thereof.

HARDI

and other product names are registered trademarks

of HARDI

Inc. in the U.S. and in other countries.

67020003 (6/02)

Operator’s Manual

Default Chapter4
- Table of Contents4
Introduction6
- COMMANDER Plus7
Description8
- Frame8
- Tank8
- Pump8
- MANIFOLD System8
- Operating Unit8
- Filters8
- Paralift8
- Booms8
- Boom Hydraulics8
Sprayer Use9
Unloading the Sprayer from the Truck9
Before Putting the Sprayer into Operation9
Safety Instructions10
- Operating the Sprayer Safely10
- Handling Chemical Products Safely11
- Local Poison Information Center11
Connecting the Sprayer12
- Drawbars12
- Mounting the Drawbar Hitch12
- Drawbar Hitch Height Adjustment12
- Support Jack12
- Fixed Drawbar Adjustment13
- Steering Drawbar (Optional)13
- Hose Package Support13
Shaft14
- P.T.O. Shaft Operator Safety14
- Installation of P.T.O. Shaft14
Wheel Tread Adjustments15
- Altering the Wheel Track Width15
Axle Systems & Tire Assemblies16
Hydraulic System17
- Hydraulics - Standard Joystick Handle17
- Direct Acting Hydraulic System (D.H.)18
- Control Boxes and Power Supply18
Transport19
- Roadworthiness19
- Rear Lights19
- Transport Brackets, Height Setting19
- Transport Lock19
- Transport Lock Arm Stop20
- Adjusting Boom Transport Position20
Driving Technique21
- Steering Drawbar (Optional)21
Disconnecting the Sprayer22
- Support Leg22
- P.T.O. Shaft Support22
Operating the Boom23
- Unfolding and Folding the HZ EAGLE™ Boom23
- Unfolding and Folding the HZ FORCE™ Boom24
- Tilting the HZ FORCE™ Boom25
ECP Plumbing Diagram26
Operating the Liquid System27
- Manifold System27
- Use of MANIFOLD Valve System27
- Electrical Operated MANIFOLD Valves (Opt.)28
Filling the Tanks on the COMMANDER Plus28
- Filling Main Tank through Tank Lid28
- Filling Flush Tank (Optional) through Lid28
- Filling with External Quick Fill (Optional)29
- Filling of Clean Water Tank29
Adjustment of ECP Operating Unit30
- Adjustment of Constant Pressure30
- Operating the Control Unit While Spraying30
Remote 4” Pressure Gauge31
- Remote 4" Pressure Gauge31
Self Cleaning Filters31
- Choice of Correct Restrictor for S.C.F31
Adjustment of Air Pressure in Pressure Damper (1302 Pump Only)31
Filling of Chemicals32
- Filling through Tank Lid32
- Filling with HARDI32
- Operating with Liquid-Based Chemicals32
- Chemical Filler32
- Operating with Powder-Base Chemicals33
Use of Flush Tank and Rinse Nozzles (Optional)34
Technical Residue34
Draining Tanks34
- Main Tank Drain Valve34
- Flush Tank (Optional)34
- Foam Marker Tank (Optional)34
Nozzle Selection35
Calibration37
Maintenance - Rules of Thumb38
- Cleaning the Sprayer38
- Cleaning the Tank39
- Cleaning and Maintenance of Filters39
Lubrication40
- About Lubricants40
- Recommended Lubricants40
- Lubrication Schedule41
Service and Maintenance Intervals44
- Hours Service44
- 1000 Hours Service or Yearly44
- Occasional Maintenance45
Off-Season Storage52
- Preparation after off Season Storage52
Equipment and Accessories53
Troubleshooting57
Emergency Operation of the Sprayer62
Technical Specifications63
- Overall Measurements63
- Weight63
- Filters and Nozzles64
- Temperature and Pressure Ranges64
- Electrical Connections Rear Lights64
- Electrical Connections for ECP Operating Unit64
Installation Instruction for Boom and Work Light65
EAGLE™ and FORCE™ Boom Hydraulics66
Warranty Policy and Conditions67

Hardi COMMANDER Plus Series User Manual

Table of Contents

Questions and Answers:

Hardi COMMANDER Plus Series Specifications

Related product manuals

Brand	Hardi
Model	COMMANDER Plus Series
Category	Paint Sprayer
Language	English