Hardi COMMANDER Plus Series User Manual

42 HARDI
®
COMMANDER OPERATOR’S MANUAL
Service and Maintenance intervals
10 hours service or daily (whichever comes first)
1. Suction filter, clean
2. Self-cleaning filter, check and clean filter element if necessary
3. In-line filters, clean
4. Nozzle filters, clean
5. Spraying circuit, check for leaks
6. Retighten bolts (suspension only)
50 hours service or weekly (whichever comes first)
Do all previous mentioned +
1. Wheel bolts and nuts, tighten
2. Tire pressure, check
3. P.T.O. shaft, check
4. Check all fasteners
5. Lubricate according to schedule
100 hours service or bi-weekly (whichever comes first)
Do all previous mentioned +
1. Fixed drawbar, check/adjust
250 hours service or monthly (whichever comes first)
Do all previous mentioned +
1. Wheel bearings, check and adjust if necessary
2. Hydraulic circuit, check
3. Hoses and tubes, check
4. Readjustment of the boom (refer to EAGLE™ or FORCE™ Boom Operator’s Manual)
1000 hours service or yearly (whichever comes first)
Do all previous mentioned +
1. Wheel bearings, dismantle, check, regrease and adjust
2. P.T.O. shaft, change parts as necessary
3. Boom center and inner section, change bearings as necessary
Maintenance

Hardi COMMANDER Plus Series Specifications

General

Brand	Hardi
Model	COMMANDER Plus Series
Category	Paint Sprayer
Language	English