43HARDI
®
COMMANDER OPERATOR’S MANUAL
Occasional maintenance
Pump valves and diaphragms renewal
Cone check/renewal, ECP operating unit
Cone check/renewal, ECP distribution valve
Wear bush renewal, boom lift
Wear bush renewal, drawbar
Shock absorbers, inspect
Level indicator adjustment
Cord renewal, level indicator
Seal renewal, drain valve
Nozzle tubes and fittings
Replacement of transmission shaft protection guards
Replacement of transmission shaft cross journals
Adjustment of 3-way-valve
Change of bulbs
Change of tires
Adjustment of breakaway device
Yaw dampers
Rubber dampers
Always check that all lock nuts are tight after adjustment
Maintenance
To Next Page
Loading...
Need help?
General
