Harman® • P42i Pellet Insert Installation Manual • 2023 -___ • 08/237 8742-901D
ReciprocatingSaw
Hammer
PhillipsScrewdriver
TapeMeasure
Level
Non-CombustibleSealant
Material
Gloves
SafetyGlasses
ElectricDrill&Bits
May also need:
VentSupportStraps
Venting Paint
Tools and building supplies normally required
for installation, unless installing into an existing
masonry replace:
B. Tools And Supplies Needed
C. Inspect Appliance and Components
• Carefully remove the appliance and components from the
packaging.
• The vent system components and decorative doors and
fronts may be shipped in separate packages.
• Ifoptionallogsetispurchased,thelogbracketmustbe
installed prior to installing the log set.
• Reportto your dealer any parts damaged in shipment,
particularly the condition of the glass.
• Read all of the instructions before starting the
installation. Follow these instructions carefully during
the installation to ensure maximum safety and benet.
Hearth&HomeTechnologiesdisclaimsanyresponsibility
for, and the warranty will be voided by, the following
actions:
• Installationanduseofanydamagedapplianceorvent
system component.
• Modicationoftheapplianceorventsystem.
• InstallationotherthanasinstructedbyHearth&Home
Technologies.
• Installation and/or use of any component part not
approvedbyHearth&HomeTechnologies.
Any such action may cause a re hazard.
Risk of Fire, Explosion or Electric Shock!
DO NOT use this appliance if any part has
been under water. Call a qualied service
technician to inspect the appliance and to
replace any part of the control system that
has been under water.
WARNING
WARNING
RISK OF FIRE OR EXPLOSION! Damaged
parts could impair safe operation. DO NOT
install damaged, incomplete or substitute
components. Keep appliance dry.