• Press the snap-fit (B) against the fuse holder (A) and remove.
向保险丝支座按压搭扣配合，然后移开。
只能用与各型号相对应等级的保险丝。见下表。
• Exchange defective mains input fuse.
更换坏了的电源保险丝。
• Reinsert the fuse holder until the snap-fit clicks shut.
重新把保险丝插入保险支座直到搭扣配合关闭。
Reconnect the centrifuge to the mains supply. 重新给离心机接上电源
Model Type Fuse Order no.
MIKRO 200 2400 T 3,15 AH/250V E997
MIKRO 200 2400-01 T 5 AH/250V E914
MIKRO 200 R 2405, 2405-07 T 5 AH/250V E914
MIKRO 200 R 2405-01 T 8 AH/250V E738
26． Acceptance of the centrifuges for repair 离心机的维修受理
If the centrifuge is returned to the manufacturer for repair, it must be decontaminated and cleaned to protect
persons, environment and material.
如果发回离心机给制造商维修,必须对离心机进行消毒及清洁来保护工作人员、环境及材料。
We reserve the right to accept contaminated centrifuges.
Hettich 保留是否接受被污染了的离心机的权利。
Costs incurred for cleaning and disinfection are to be charged to the customer.
清洁及消毒引起的费用需要顾客来承担。
We ask for your understanding in this matter. Hettich
请顾客理解。
27． Disposal 报废
When you are disposing of the device, the respective statutory rules must be observed. Pursuant to guideline
2002/96/EC (WEEE), all devices supplied after August 13, 2005 may not be disposed as part of domestic waste.
The device belongs to group 8 (medical devices) and is categorized in the business-to-business field.
当报废该仪器时，必须遵守相应的法规。根据 2002/96/EC (WEEE)准则， 所有自 2005 年 8 月 13 号后销售
的设备不可作为生活垃圾来处理。该仪器属于第 8 类（医学设备）产品， 被划入到商业间类别。
The icon of the crossed-out trash can shows that the device may not be disposed as part of domestic
waste. 划掉的垃圾桶图像表示该仪器不可以作为生活垃圾来处理。
To Next Page
Loading...
Need help?
General
