114
Figure 5-37. User Lockout Attempts
2. Set parameters.
Retry Times Before Auto-Lock
If the user continuously input the incorrect password for more than the configured times, the
account will be locked.
Note
The administrator has two more attempts than the configured value.
Auto-lock Time
Set the locking duration when the account is locked.
Note
The available locking duration is 5s to 1800s.
3. Click to unlock the account or click Unlock All to unlock all locked users in the list.
4. Click Save.
Module Lock Settings
Set the module locking parameters, including the Retry Times before Auto-Lock, and locked
duration. The module will be locked for the programmed time duration, once the module
authentication has failed for the amount of configured times.
Steps
1. Click Maintenance and Security → Maintenance → Module Locking Settings to enter the
page.
2. Select a module from the list, and click .
To Next Page
Loading...
Need help?
General
