HIKVISION AX PRO User Manual

82
Figure 5-15. Area
Late to Disarm Notification
Enable the function and set the time. If the alarm is triggered after the configured time, the
person will be considered as late.
Enable Auto Arm
Enable the function and set the arming start time (Time Schedule). The zone will be armed
according to the configured time.
Note
The auto arming time and the auto disarming time cannot be the same.
-Force Arm When System has Faults:
While the function is enabled, faults will be ignored when the system is automatically armed.
-Count Down Sound Prompt:
After enabled, the buzzer beeps slowly 2 minutes before the auto arming starts, and beeps
rapidly 1 minute before the auto arming starts.
After disabled, the buzzer will not beep before auto arming.
Enable Auto Disarm
Enable the function and set the disarming start time(Time Schedule). The zone will be
disarmed according to the configured time.
Note
The auto arming time and the auto disarming time cannot be the same.

HIKVISION AX PRO Specifications

General

Brand	HIKVISION
Model	AX PRO
Category	Security System
Language	English