User Manual of Network Fisheye Camera
62
for motion detection without considering the day / night switch.
Figure 5-40 Motion Detection Settings-Normal Mode
(1) Click the Draw Area button to start drawing.
(2) Click-and-drag the mouse on the live video to draw a motion detection area.
(3) Click Stop Drawing to finish drawing.
(4) Repeat above steps to draw other detection areas.
(5) Click-and-drag the slider to set the sensitivity of the detection.
The sensitivity value ranges from 0 to 100. And the higher the value is, the
easier the motion can be detected.
(6) You can click Clear All to clear all of the configured areas.
Expert Mode
If Expert is selected as the configuration mode, different sets of parameters are
adopted for motion detection at day and night.
To Next Page
Loading...
Need help?
General
