User Manual of Network PTZ Camera
© Hikvision
Figure 6-40 Linked Scene
4. When you enable the function of Scheduled-Switch, check the corresponding checkbox, set
the time period and the linked scene.
Figure 6-41 Schedule-Switch
5. Click to save the settings.
The two functions are not enabled by default.
6.4 Configuring System Settings
6.4.1 System Settings
Viewing Basic Information
Enter the Device Information interface:
Configuration > System > System Settings > Basic Information
In the Basic Information interface, you can edit the Device Name and Device No.
Other information of the camera, such as Model, Serial No., Firmware Version, Encoding Version,
Web Version, Plugin Version, Number of Channels, Number of HDDs, Number of Alarm Input,
Number of Alarm Output, and Firmware Version Property are displayed. The information cannot
be changed in this menu. It is the reference for maintenance or modification in future.
To Next Page
Loading...
Need help?
General
