User Manual of Network PTZ Camera
© Hikvision
6.4.4 User Management
Enter the User Management interface:
Configuration > System > User Management
The admin user has access to create, modify or delete other accounts. Up to 32 user accounts can
be created.
Figure 6-56 User Information
Add a User
Steps:
1. Click to add a user.
2. Input the new User Name, select Level and input Password.
For your privacy and to better protect your system against security risks, we strongly recommend the use
of strong passwords for all functions and network devices. The password should be something of your
own choosing (Using a minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters.) in order to increase the security
of your product.
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
The level indicates the permissions you give to the user. You can define the user as Operator
or User.
3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the
permissions for the new user.
4. Click to finish the user addition.
To Next Page
Loading...
Need help?
General
