EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2DE2A404IW-DE3/W

HIKVISION DS-2DE2A404IW-DE3/W User Manual

HIKVISION DS-2DE2A404IW-DE3/W
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
User Manual of Network PTZ Camera
© Hikvision
59
Customize an Initial Position:
Steps:
1. Enter the Initial Position configuration interface:
Configuration > PTZ > Initial Position
Figure 5-28 PTZ Configuration
2. Click the PTZ control buttons to find a position as the initial position of the speed dome; you
can also call a defined preset and set it as the initial position of the speed dome.
3. Click Set to save the position.
Call/delete an Initial Position:
You can click to call the initial position. You can click to delete the initial position and
restore the factory default initial position.
5.4.4 Configuring Park Actions
Purpose:
This feature allows the camera to start a predefined park action (scan, preset, pattern and etc.)
automatically after a period of inactivity (park time).
Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.
Park function varies depending on different camera models.
Steps:
1. Enter the Park Action settings interface:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE2A404IW-DE3/W and is the answer not in the manual?

HIKVISION DS-2DE2A404IW-DE3/W Specifications

General IconGeneral
BrandHIKVISION
ModelDS-2DE2A404IW-DE3/W
CategorySecurity Camera
LanguageEnglish

Related product manuals