HIKVISION DS-2DE2A404IW-DE3/W User Manual

User Manual of Network PTZ Camera
© Hikvision
79
Figure 6-19 Integration Protocol Settings
2. Check the Enable Hikvision-CGI checkbox and then select the authentication from the
dropdown list. Then you can access to the camera through the third party platform.
3. Check the Enable ONVIF checkbox to enable the function.
4. Click Add to add a new ONVIF user. Set the user name and password, and confirm the
password. You can set the user as media user, operator, and administrator.
5. Click Modify to modify the information of the added ONVIF user.
6. Click Delete to delete the selected ONVIF user.
7. Click to save the settings
6.2 Configuring Video and Audio Settings
6.2.1 Configuring Video Settings
Steps:
1. Enter the Video settings interface:
Configuration > Video/Audio > Video

HIKVISION DS-2DE2A404IW-DE3/W Specifications

General

Brand	HIKVISION
Model	DS-2DE2A404IW-DE3/W
Category	Security Camera
Language	English