User Manual of Network PTZ Camera
© Hikvision
Click , the lens focus far and the
items far away gets clear. Click ,
the lens focus near and the items
nearby gets clear.
When the image is too dark, click
to open the iris. When the
image is too bright, click to
close the iris.
The auxiliary functions include light,
wiper, auxiliary focus, lens
initialization, manual tracking, 3D
positioning, one-touch patrol, and
one-touch park.
Adjust speed of pan/tilt movements.
Refer to 4.4.3 for detailed
information of setting preset.
Refer to 4.4.4 for detailed
information of setting patrol.
Refer to4.4.6 for detailed
information of setting pattern.
Buttons on the Preset/Patrol/Patterns interface:
Table 4-3 Descriptions of Buttons
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
4.4.2 Auxiliary Functions
The Auxiliary functions panel is shown in Figure 4-5.
To Next Page
Loading...
Need help?
General
