Reference Brightness
It refers to the reference brightness of a face in the face exposure mode. If a face in the actual
scene is brighter than the set reference brightness, the device lowers the exposure level. If a
face in the actual scene is darker than the set reference, the device increases the exposure
level.
Minimum Duraon
The extra me the device keeps the face exposure level aer the face disappears in the scene.
Face Filtering Time
It means the me interval between the camera detecng a face and taking a capture acon. If
the detected face stays in the scene for less than the set ltering me, capture will not be
triggered. For example, if the face
ltering me is set as 5 seconds, the camera will capture the
detected face when the face keeps staying in the scene for 5 seconds.
Data Upload
Check one or more desired target types for picture uploading.
3.7 Smart Display
This funcon displays real me pictures captured by smart funcons and analyzes the target in real
me.
Note
To use this funcon, your web browser version should be above IE11.0.9600.17843.
Live View Parameter
Icon Funcon
Start or stop live view.
For devices with mulple channels, you can choose a way to display the images.
For devices with mulple channels, you can choose a channel for live view.
Capture a picture.
Start or stop recording.
Adjust the volume of live view. Move the slider to right to turn up the volume and
le to turn down the volume. Move to the le end to mute the live view.
Network Speed Dome User Manual
22
To Next Page
Loading...
Need help?
General
