HIKVISION DS-7608NI-L1/W User Manual

Network Video Recorder User Manual
89
Figure 7-19 Copy Settings of Alarm Output
7.9 Trigger or Clear Alarm Output Manually
Sensor alarm can be triggered or cleared manually. If Manually Clear is selected in the dwell time
of an alarm output, the alarm can be cleared only by clicking Clear in the following interface.
Steps
1. Go to Menu → Manual → Alarm
2. Select the alarm output you want to trigger or clear and make related operations.
● Click Trigger/Clear if you want to trigger or clear an alarm output.
● Click Trigger All if you want to trigger all alarm outputs.
● Click Clear All if you want to clear all alarm output.

HIKVISION DS-7608NI-L1/W Specifications

General

Brand	HIKVISION
Model	DS-7608NI-L1/W
Category	Network Hardware
Language	English