Network Video Recorder User Manual
54
3. Enter Record/Capture Schedule settings interface to edit the holiday recording schedule. See
Configure Recording Schedule.
4.8 Configure Redundant Recording
Enabling redundant recording, which means saving the record files and captured pictures not only
in the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and
reliability.
Steps
1. Go to Menu → HDD.
Figure 4-22 HDD General
2. Select the HDD and click to enter the Local HDD Settings interface.
1) Set the HDD property to Redundancy.
Figure 4-23 HDD General-Editing
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
Note
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD
property to Redundant. For detailed information, please refer to . There should be at least
another HDD which is in Read/Write status.
3. Go to Menu → Record → Parameters.
1) Select Record.
2) Click More Settings.
To Next Page
Loading...
Need help?
General
