Network Video Recorder User Manual
7
Wi-Fi cameras. The process will take about 2 minutes. The Wi-Fi camera will use IP Camera
Activation Password as its password. (Refer to Activate Your Device.)
Note
● It is recommended to keep the distance between Wi-Fi camera and device within 50 meters.
● Only certain Wi-Fi camera models and versions support this function.
● Ensure the Wi-Fi camera is powered on, not activated, and has not been connected with other
devices via network cable.
1.2.3 Wi-Fi Auto-Switch
When adding Wi-Fi cameras to a Wi-Fi NVR, Wi-Fi Auto-Switch (For Initial Access) can synchronize
Wi-Fi parameters to the IP camera.
1.2.4 Add Online IP Cameras
The main function of the NVR is to connect the network cameras and record the video got from it.
So before you can get a live view or record of the video, you should add the network cameras to
the connection list of the device.
Before You Start
Ensure the network connection is valid and correct. For detailed checking and configuring of the
network.
Steps
1. Adding the IP Cameras.
– OPTION 1
1. Click to select an idle window in the live view mode.
2. Click the in the center of the windw to pop up the adding IP camera interface.
3. Select the detected IP camera and click the Add button to add it directly, and you can click
the Search button to refresh the online IP camera manually. Or you can choose to custom
add the IP camera by editing the parameters in the corresponding textfiled and then click
the Add button to add it.
To Next Page
Loading...
Need help?
General
