HIKVISION DS-9600NI-M8 Series User Manual

Network Video Recorder User Manual
124
Note
Repeat the above steps to set other working devices.
12.2 Set Hot Spare Device
Hot spare device will take over working device tasks when working device fails.
Steps
1. Go to System → Hot Spare.
2. Set Work Mode as Hot Spare Mode.
Figure 12-3 Hot Spare
3. Click Apply.
4. Click Yes in the pop-up. Your device will restart automatically.
Note
● The camera connection will be disabled when the device works in hot spare mode.
● It is highly recommended to restore the device defaults after switching the work mode of hot
spare devices to normal mode to ensure the normal operation afterward.
12.3 Manage Hot Spare System
Steps
Note
● Up to 32 working devices and 32 hot spare devices are allowed in the hot spare system.
● Only one hot spare device can add working devices and other hot spare devices. You can find
the hot spare device IP address from working devices.
1. Go to System → Hot Spare through the hot spare device.

HIKVISION DS-9600NI-M8 Series Specifications

General

Brand	HIKVISION
Model	DS-9600NI-M8 Series
Category	Network Hardware
Language	English