Network Video Recorder User Manual
29
Figure 3-1 Shortcut Menu
Note
If exception occurs, error information will be displayed on the screen. Click to edit the
parameters of different channel(s).
3.1.1 Configure Live View Settings
Live View settings can be customized. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps
1. Go to System → Live View → General.
Figure 3-2 Live View-General
2. Configure the live view parameters.
Video Output Interface
Select the video output to configure.
Live View Mode
Select the display mode for Live View, e.g., 2*2, 1*5, etc.
To Next Page
Loading...
Need help?
General
