Network Video Recorder User Manual
158
4. Click Test.
Figure 16-3 Test Network Delay and Packet Loss
16.5.3 Export Network Packet
After the recorder accessing network, you can use USB flash drive to export network packet.
Before You Start
Prepare a USB flash drive to export network packet.
Steps
1. Insert the USB flash drive.
2. Go to Maintenance → Network → Network Detection.
3. Select network card in Select NIC.
4. Select the USB flash drive in Device Name. You can click Refresh if the connected local backup
device cannot be displayed.
Figure 16-4 Export Network Packet
5. Optional: Click Status to view the network status.
6. Click Export.
Note
It will export 1 MB data each time as default.
16.5.4 Network Resource Statistics
The remote access, including web browser and client software, will consume output bandwidth.
You can view the real-time bandwidth statistics.
Steps
1. Go to Maintenance → Network → Network Stat.