Digital Video Recorder User Manual
127
Searching and viewing logs and system information of device.
Local Parameters Settings
Configuring parameters, restoring factory default parameters, and importing/exporting
configuration files.
Local Camera Management
Adding, deleting, and editing of IP cameras.
Local Advanced Operation
Operating HDD management (initializing HDD, setting HDD property), upgrading system
firmware, clearing I/O alarm output.
Local Shutdown Reboot
Shutting down or rebooting the device.
2) Set Remote Configuration
Remote Log Search
Remotely viewing logs that are saved on the device.
Remote Parameters Settings
Remotely configuring parameters, restoring factory default parameters, and
importing/exporting configuration files.
Remote Camera Management
Remote adding, deleting, and editing of the IP cameras.
Remote Serial Port Control
Configuring settings for RS-232 and RS-485 port settings.
Remote Video Output Control
Sending remote button control signals.
Two-Way Audio
Operating the two-way radio between the remote client and the device.
Remote Alarm Control
Remotely arming (notify alarm and exception message to the remote client) and
controlling the alarm output.
Remote Advanced Operation
Remotely operating HDD management (initializing HDD, setting HDD property), upgrading
system firmware, clearing I/O alarm output.
Remote Shutdown/Reboot
Remotely shutting down or rebooting the device.
3) Set Camera Configuration
Remote Live View
To Next Page
Loading...
Need help?
General