HIKVISION DS-E00HGHI-B Series User Manual

Digital Video Recorder User Manual
72
4) Click Draw Region.
5) Draw a virtual line in the preview window.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set linkage actions. Refer to Configure Linkage Actions.
9. Click Apply.
Note
For iDS-7200 series, you can set Target Detection as Human or Vehicle. Only the target of
selected type will trigger the alarm.
5.5.3 Region Entrance Detection
Region entrance detection detects objects that enter a predefined virtual region.
Steps
1. Go to System Management → Event Settings → Smart Event.
2. Click Region Entrance Detection.
Figure 5-9 Region Entrance Detection
3. Select a camera.
4. Check Enable Region Entrance Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of region entrance detection
pictures.
6. Set detection rules and detection areas.
1) Select Arming Region. Up to 4 regions are selectable.

HIKVISION DS-E00HGHI-B Series Specifications

General

Brand	HIKVISION
Model	DS-E00HGHI-B Series
Category	DVR
Language	English