Digital Video Recorder User Manual
51
7. Click OK to save settings.
4.1.12 Configure 1080p Lite Mode
When 1080P Lite Mode is enabled, the encoding resolution at 1080P Lite (real-time) is supported.
If not, up to 1080P (non-real-time) is supported.
Go to Storage → Advanced to enable or disable 1080P Lite Mode.
4.2 Playback
4.2.1 Instant Playback
Instant playback enables the device to play the recorded video files recorded in the last five
minutes. If no video is found, it means there is no recording during the last five minutes.
After selecting the camera on Live View, you can move the cursor to the window bottom to access
the toolbar, and click to start instant playback.
Figure 4-5 Playback
4.2.2 Play Normal Video
Go to Playback, select date and camera(s). is the window division
shortcut for grouping cameras and playing videos. You can also select camera(s) from the list to
achieve simultaneous playback of multiple camera(s).
Position the cursor on playback window, and use the toolbar at the bottom to perform playback
operations. Refer to Playback Operations for details.
To Next Page
Loading...
Need help?
General