Digital Video Recorder User Manual
2
Warning
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
2. Enter the password to activate the IP cameras.
3. Optional: Check Export GUID, Security Question Configuration, or Reserved E-mail Settings.
4. Click OK.
Note
● After the device is activated, you should properly keep the password.
● You can duplicate the password to the IP cameras that are connected with default protocol.
● The available password resetting functions may vary according to different models.
What to do next
● When you have enabled Export GUID, continue to export the GUID file to the USB flash driver
for the future password resetting.
● When you have enabled Security Question Configuration, continue to set the security questions
for the future password resetting.
● When you have enabled Reserved E-mail Settings, continue to set the reserved email for the
future password resetting.
1.1.3 Activate via SADP
SADP software is used for detecting the online device, activating the device, and resetting its
password.
Before You Start
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts.
Steps
1. Connect your video recorder power supply to an electrical outlet and turn on it.
2. Run the SADP software to search the online recorders.
3. Check the recorder status from the device list, and select the inactive recorder.
To Next Page
Loading...
Need help?
General