Port No.
Set the EHome server's port No.
EHome Version
Set the EHome version according to your actual needs. If you choose V5.0, you should create
an account and EHome key. If you choose other version, you should create an EHome account
only.
Note
●
Remember the EHome account and EHome key. You should enter the account name or the
key when the device should communicate with other plaorms via EHome protocol.
●
EHome key range: 8 to 32 characters.
5.4.4 Change Vericaon Code
You can change the device vericaon code before you add the device to the Hik-Connect mobile
client.
Before You Start
Make sure your device has connected to a network.
Steps
1.
Move the cursor and select Comm. → Mobile-App .
2.
Input a new device
vericaon code in the Vericaon Code.
Result
The device
vericaon code is changed. You should input the new vericaon code when you add
the device to the Hik-Connect mobile client.
5.5 Person Management
5.5.1 Add Person
You can add users by seng the ID No., the user name, and the card No. You can also record the
user ngerprint, set the password, the department, the role and the authencaon mode.
Steps
1.
Move the cursor and select User → New to enter the New page.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
18
To Next Page
Loading...
Need help?
General
