HIKVISION DS-PHA20-W2P User Manual

Enable the funcon and the zone will be bypassed. No alarm will be received while the zone
is bypassed.
Link Camera
You can link the zone to cameras. When an alarm is triggered, you can monitor the zone via
the linked cameras.
Stay/Away
If this opon is Enabled the zone will be auto bypassed when the alarm system is stay armed.
To re-enable the zone deselect the
opon.
Enable Silent Zone
Enable the funcon and no sounder will be triggered if an event or alarm occurs.
4.3.12 Set Arming/Disarming Schedule
Set the arming/disarming schedule to arm/disarm a parcular zone automacally.
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap
→ Area Management and select a area, or tap on the Parion page to enter the Sengs
page.
Enable the auto arm/disarm
funcon and set the auto arm me/auto disarm me. You can also set
the late to disarm me, entry delay me, exit delay me, sounder delay me, weekend excepon
and excepted holiday.
Hybrid Security Control Panel User Manual
76

HIKVISION DS-PHA20-W2P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-W2P
Category	Control Panel
Language	English