HIKVISION DS-PHA64-M User Manual

10.
Oponal: Click to delete the keyfob.
5.6.3 Add/Edit/Delete User
Administrator can add user to the security control panel, edit the user informaon, or delete the
user from the security control panel. You can also assign dierent permissions to the new user.
Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click
Conguraon → User Management → User to enter the User Management page.
3. To compliant the EN requirement, slide the block to enable the installer and maintenance .
Note
• The default user name of admin account is admin. The password is the
acvaon password.
• The default password of the installer is installer12345, and the default password of the
maintenance (for Italian, the user name is costruore) is hik12345. These password will have
to be changed when rst connected.
•
The Italian user name of admin is admin.
Table 5-4 User Name of Installer
Language User Name Language User Name
English installer Russian монтажник
Italian installatore French installateur
Polish instalator Spanish instalador
German errichter Portuguese instalador
Turkish kurulumcu Czech technik
4. Click Add.
5. Set the new user's
informaon in the pop-up window, including the user type, the user name,
and the password.
Hybrid Security Control Panel User Manual
94

HIKVISION DS-PHA64-M Specifications

General

Brand	HIKVISION
Model	DS-PHA64-M
Category	Control Panel
Language	English