HIKVISION DS-PHA64-M User Manual

ON
When the area arm/disarm, the relay will be opened.
OFF
When the area arm/disarm, the relay will be closed.
9. Click OK.
Note
Aer the relay is congured, you can click Device Status → Relay to view the output status.
Keypad
The keypad is connected to the control panel via RS-485 wiring. You can refer to Hybrid Control
Panel Quick Start Guide for wiring details.
Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click Conguraon → Control Device → Keypad to enter the page.
3. Click to enter the Keypad Sengs page.
Figure 4-23 Edit Keypad
4. Set the keypad name.
5. Select the keypad linked area.
6. Enable Silence the Panic Alarm according to your needs.
Silence the Panic Alarm
When enabled, the panic alarm of the wireless keypad will have no linkage prompt.
7. Enter company name and phone number.
Hybrid Security Control Panel User Manual
37

HIKVISION DS-PHA64-M Specifications

General

Brand	HIKVISION
Model	DS-PHA64-M
Category	Control Panel
Language	English