To Next Page

To Previous Page

5.4 Use the Card

It is poissible to arm or disarm the system with the card.

While the system is not armed, present a valid card to the control panel to arm the system.

While the system is armed, present a valid card to the control panel to disarm the system.

5.5 Use the Client Soware

Steps

1. Download, install and register to the client soware.

2. Add device in Device Management → Device .

Note

• Set the device port No. as 80.

• The user name and password when adding device are the

acvaon user name and

password.

3. Click to enter the Remote Conguraon page aer the device is completely added,

5.5.1 Add Device to the Client

Soware

Before You Start

Acvate the device and ensure that the device is on the same subnet as the PC.

Figure 5-4 Client Soware Main Page

In the client soware, go to Device Management → Device on the Maintenance and Management

list. You can add devices to client

soware by several methods on the device management page.

Hybrid Security Control Panel User Manual

HIKVISION DS-PHA64-M User Manual

Questions and Answers: