HIKVISION DS-PHA64-M User Manual

Table 3-1 User Name of Installer
Language User Name Language User Name
English installer Russian монтажник
Italian installatore French installateur
Polish instalator Spanish instalador
German errichter Portuguese instalador
Turkish kurulumcu Czech technik
3.2 Acvate Device via Client Soware
Before You Start
• Get the iVMS-4200 client soware from the supplied disk or the ocial website hp://
www.hikvision.com/en/ . Install the soware by following the prompts.
• The device and the PC that runs the soware should be in the same subnet.
Steps
1. Run the client soware.
2. Oponal: Click , select the Cloud P2P Region, and login the Cloud P2P account.
Note
• For the
rst use, you need to register a cloud P2P account.
• Aer logging in, you can store your device on the cloud.
3. Enter Device Management → Device in the Maintenance and Management list.
4. Click Online Device.
5. Check the device status from the online device list, and select an
inacve device.
6. Click
Acvate.
7. Create and conrm the admin password of the device.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
8. Click OK to start acvaon.
Device status will change to Acve aer successful acvaon.
9. Edit IP address of the device.
Hybrid Security Control Panel User Manual
6

HIKVISION DS-PHA64-M Specifications

General

Brand	HIKVISION
Model	DS-PHA64-M
Category	Control Panel
Language	English