Network Traffic Camera • User Manual
23
MTU: Maximum Transmission Unit, which refers to the size of the largest data packet
transmitted in the TCP / UDP protocol network transmission.
Multicast Address: The address of the multicast server is an IPv4 address (class D address),
which can be viewed by joining a multicast group.
Preferred DNS server: DNS server address (IPv4 address).
ANPR IP Address: ANPR listening IP address. Picture can be transferred from device to server
by setting ANPR IP address and ANPR port in ANPR protocol.
ANPR Port: ANPR listening port. Picture can be transferred from device to server by setting
ANPR IP address and ANPR port in ANPR protocol.
Listening Host IP Address: Picture can be transferred from device to server by setting listening
host IP address and listening host port.
Listening Host Port: Picture can be transferred from device to server by setting listening host
IP address and listening host port.
ANPR listening will be prior listening when ANPR listening and listening are both set.
If you want to set listening as prior listening, check Picture Uploading Listening, and set
ANPR listening and listening.
The Multicast sends a stream to the multicast group address and allows multiple clients to
acquire the stream at the same time by requesting a copy from the multicast group
address. Before utilizing this function, you have to enable the Multicast function of your
router.
A reboot is required for the settings to take effect.
Click Save.
Set Port
Purpose:
Set HTTP port, RTSP port, SDK port information to connect corresponding client.
Go to Configuration > Device Configuration > System Configuration > Port.
Port Settings
To Next Page
Loading...
Need help?
General
