EasyManuals Logo
Home>HIKVISION>Security Camera>iDS-TCV500-BI

HIKVISION iDS-TCV500-BI User Manual

HIKVISION iDS-TCV500-BI
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Network Traffic Camera • User Manual
8
Switch
ComputerNetwork Traffic Camera
Connecting via a Switch or a Router
Activate the Device
You are required to activate the device first by setting a strong password for it before you can use
the device.
Activation via Web Browser and Activation via SADP Software are supported.
Activation via Web Browser
Power on the device, and connect the device to the network.
Input the IP address into the address bar of the web browser, and press Enter to enter the
activation interface.
Activation Interface (Web)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-TCV500-BI and is the answer not in the manual?

HIKVISION iDS-TCV500-BI Specifications

General IconGeneral
Card reader integratedYes
Maximum memory card size128 GB
Maximum resolution2464 x 2056 pixels
Image quality adjustmentSaturation, Brightness, Contrast, Sharpness, DNR
Video compression formatsH.264, H.265
Placement supportedOutdoor
Signal-to-Noise Ratio (SNR)60 dB
Number of users32 user(s)
Supported network protocolsTCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
FocusMotorized/Manual
Minimum illumination0.001 lx
Housing materialAluminum
International Protection (IP) codeIP66

Related product manuals