HIKVISION iDS-TCV500-BI User Manual

Network Traffic Camera • User Manual
72
Usually one lane links to one flash light. If you link more than 1 flash light, you need to select
Flashlight Mode. You can select simultaneous flash and sequential flash as requested.
(Optional) Copy the configuration of current external input to other external inputs by
checking the corresponding checkboxes among T1 to T4.
Click Save to save the settings.
You can click Default to restore the parameters to default values.
Checkpoint Vehicle Detector
If the device gets triggered by the vehicle detector, you can select the trigger mode as Checkpoint
Vehicle Detector. Once a vehicle passes by, a signal will be sent to the device.
Go to Configuration > Device Configuration > Application Mode.
Select Application Mode as Checkpoint Vehicle Detector.

HIKVISION iDS-TCV500-BI Specifications

General

Card reader integrated	Yes
Maximum memory card size	128 GB
Maximum resolution	2464 x 2056 pixels
Image quality adjustment	Saturation, Brightness, Contrast, Sharpness, DNR
Video compression formats	H.264, H.265
Placement supported	Outdoor
Signal-to-Noise Ratio (SNR)	60 dB
Number of users	32 user(s)
Supported network protocols	TCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Focus	Motorized/Manual
Minimum illumination	0.001 lx
Housing material	Aluminum
International Protection (IP) code	IP66