HIKVISION iDS-TCV500-BI User Manual

Network Traffic Camera • User Manual
36
Redundant Storage Configuration
View the HDD information such as Capacity, Free Space, Status, etc.
(Optional) Check the HDD and click Format to format it.
(Optional) Check Auto-Initialize Redundant Storage. Then the TF card in the redundant
storage can be formatted automatically. The storage is used for store captured pictures,
traffic violation video, and log.
(Optional) Check Auto-Upload Data in Redundant Storage.
Set the HDD Quota.
1) Enter the Capture Quota Ratio.
2) Enter the Video Quota Ratio.

The Capture Quota Ratio ranges from 0 to 100%.

The sum of Capture Quota Ratio and Video Quota Ratio should be 100%.
Set FTP
Purpose:
You can set FTP server to enable the uploading of the captured pictures to the FTP server.
We have three ways to storage data (priority ranking from prior to less prior): FTP, SDK arming and
local memory card storage. If FTP is enabled, the SDK arming and local memory card storage are
invalid. If SDK arming is enabled, memory card storage is invalid.
Go to Configuration > Device Configuration > Encoding and Storage > FTP.

HIKVISION iDS-TCV500-BI Specifications

General

Card reader integrated	Yes
Maximum memory card size	128 GB
Maximum resolution	2464 x 2056 pixels
Image quality adjustment	Saturation, Brightness, Contrast, Sharpness, DNR
Video compression formats	H.264, H.265
Placement supported	Outdoor
Signal-to-Noise Ratio (SNR)	60 dB
Number of users	32 user(s)
Supported network protocols	TCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Focus	Motorized/Manual
Minimum illumination	0.001 lx
Housing material	Aluminum
International Protection (IP) code	IP66