HIKVISION iDS-TCV500-BI User Manual

Network Traffic Camera • User Manual
47
Chapter 9 Capture Parameters Configuration
Purpose:
You can set capture parameters before capturing, and edit capture parameters when the default
capture parameters cannot meet actual needs.
Set License Plate Parameters
Go to Configuration > Device Configuration > Capture Parameters > License Parameters.
License Parameters Configuration
Select License Plate Recognition as Front Plate or Back Plate. You should select Front
Plate when you want to capture license plate number in vehicle head direction, and
select Back Plate when you want to capture license plate number in vehicle tail direction.
Set Flash Light Parameters
Go to Configuration > Device Configuration > Capture Parameters > Flash Light
Parameters.
Select a tab corresponded with the flash light control port.

HIKVISION iDS-TCV500-BI Specifications

General

Card reader integrated	Yes
Maximum memory card size	128 GB
Maximum resolution	2464 x 2056 pixels
Image quality adjustment	Saturation, Brightness, Contrast, Sharpness, DNR
Video compression formats	H.264, H.265
Placement supported	Outdoor
Signal-to-Noise Ratio (SNR)	60 dB
Number of users	32 user(s)
Supported network protocols	TCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Focus	Motorized/Manual
Minimum illumination	0.001 lx
Housing material	Aluminum
International Protection (IP) code	IP66