HIKVISION iDS-TCV500-BI User Manual

Network Traffic Camera • User Manual
7
Chapter 1 Network Connection

You shall acknowledge that the use of the product with Internet access might be under
network security risks. For avoidance of any network attacks and information leakage,
please strengthen your own protection. If the product does not work properly, please
contact with your dealer or the nearest service center.

To ensure the network security of the device, we recommend you to have the device
assessed and maintained termly. You can contact us if you need such service.
Purpose:
To view and set the device via a LAN, you need to connect the device in the same subnet with your
computer, and install the SADP to search and change the IP address of the device.
Wiring over the LAN
The following figures show the two ways of cable connection of a device and a computer.
Purpose:
 To test the device, you can directly connect the device to the computer with a network cable.
 Set device over the LAN via a switch or a router.
Network Cable
Computer
Network Traffic Camera
Connecting Directly

HIKVISION iDS-TCV500-BI Specifications

General

Card reader integrated	Yes
Maximum memory card size	128 GB
Maximum resolution	2464 x 2056 pixels
Image quality adjustment	Saturation, Brightness, Contrast, Sharpness, DNR
Video compression formats	H.264, H.265
Placement supported	Outdoor
Signal-to-Noise Ratio (SNR)	60 dB
Number of users	32 user(s)
Supported network protocols	TCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Focus	Motorized/Manual
Minimum illumination	0.001 lx
Housing material	Aluminum
International Protection (IP) code	IP66