HIKVISION iDS-TCV500-BI User Manual

Network Traffic Camera • User Manual
42
Chapter 8 Text Overlay Configuration
Purpose:
Set the OSD on the captured pictures and videos.
Set Capture Picture Overlay
Purpose:
You can set the overlay information of the captured picture.
Steps:
Go to Configuration > Device Configuration > Text Overlay > Capture Picture Overlay.
Single Picture Overlay
Check Capture Picture Overlay.
Set the parameters.
 Percentage: The percentage of the information overlaid on the picture.
 Font Size: The font size of the overlay information.
 Foreground Color: The foreground color of the overlay information.
 Background Color: The background color of the overlay information.
Set the overlay text position.
 Overlay on Picture: Display the information on the picture.

HIKVISION iDS-TCV500-BI Specifications

General

Card reader integrated	Yes
Maximum memory card size	128 GB
Maximum resolution	2464 x 2056 pixels
Image quality adjustment	Saturation, Brightness, Contrast, Sharpness, DNR
Video compression formats	H.264, H.265
Placement supported	Outdoor
Signal-to-Noise Ratio (SNR)	60 dB
Number of users	32 user(s)
Supported network protocols	TCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Focus	Motorized/Manual
Minimum illumination	0.001 lx
Housing material	Aluminum
International Protection (IP) code	IP66