HIKVISION Ultra Series User Manual

Chapter 8 Quick Operaon via Web Browser
8.1 Select Language
You can select a language for the device system.
Click in the top right of the web page to enter the Device Language Sengs page. You can
select a language for the device system from the drop-down list.
By default, the system language is English.
Note
Aer you change the system language, the device will reboot automacally.
Click Next to complete the sengs.
8.2 Time
Sengs
Click in the top right of the web page to enter the wizard page. Aer seng device language,
you can click Next to enter the Time Sengs page.
Time Zone
Select the device located
me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
Server Address/NTP Port/Interval
You can set the server address, NTP port, and interval.
Click Next to save the sengs and go to the next parameter. Or click Skip to skip me sengs.
8.3 Privacy
Sengs
Set the picture uploading and storage parameters.
Click
in the top right of the web page to enter the wizard page. Aer previous sengs, you can
click Next to enter the Privacy Sengs page.
Face Recognion Terminal User Manual
75

HIKVISION Ultra Series Specifications

General

Brand	HIKVISION
Model	Ultra Series
Category	Touch terminals
Language	English