Hisense 32A5KQ User Manual

Connecting to External Devices
Remote & Accessories
Connect remote controls or other accessories, such as keyboard, mouse and gamepad, to interact with your
Smart TV with ease.
Connect Remote Control
Connect a Bluetooth remote control
Pair the Bluetooth remote control to the TV after you power the TV on.
Keep the remote control within 3 metres from the TV. Press any button (except power and mic button) to pair.
Note:
•
Before pairing, check to ensure the Bluetooth function and the Remote Control Auto Pairing function
are turned on by pressing / button on your remote control to select Settings > Connection >
Bluetooth to On, and then select Remote Control Auto Pairing to On.
•
In special cases, press and hold / button to pair.
•
You can choose to close the remote control auto pairing function by pressing / button on your
remote control and select Settings > Connection > Bluetooth > Remote Control Auto Pairing to turn
it off.
• This function may not be applicable in some models/countries/regions.
• If an error occurred while trying to pair the remote control, it could have been caused by interference. Try
to remove what is causing the interference and try pairing again.
• If an error occurred with the remote control while using sufficiently charged batteries, you can remove the
batteries for 1~2 seconds then insert them once again. Now the remote control should work correctly.
• The remote control cannot be paired to the TV while the TV is in standby mode.
Use HDMI & CEC
Use the TV remote to control external devices that are connected to the TV by a HDMI cable. The external
devices need to support HDMI & CEC function.
Press / button on your remote control and select Settings > Connection > HDMI & CEC.
Connect an external device through HDMI & CEC function
Press / button on your remote control and select Settings > Connection > HDMI & CEC > CEC
Control.
Allow HDMI devices to control each other.
1. Set CEC Control to On.
2. Connect a HDMI & CEC compatible device to the TV.
3. Turn on the connected external device. The device will be connected to the TV automatically. After
connection is completed, you can access the menu of the connected device on your TV screen using your
TV remote and control the device.
4. When CEC control is enabled and HDMI & CEC compatible external devices are turned off, the TV will
enter the standby mode. The function needs to be supported by the external device.
36

Hisense 32A5KQ Specifications

General

Operating system version	U6
Operating system installed	VIDAA
Hybrid Broadcast Broadband TV (HbbTV) version	2.0.3
Audio decoders	Dolby Digital, DTS, DTS Virtual:X, DTS-HD, Dolby MS12
RMS rated power	16 W
Number of speakers	2
Audio output channels	2.0 channels
Screen shape	Flat
Response time	9.5 ms
Display diagonal	32 \
Display brightness	200 cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Contrast ratio (typical)	3000:1
Display diagonal (metric)	80 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
Audio formats supported	AAC, AC3, FLAC, M4A, MP3, OPUS, PCM, WAV, WMA
Image formats supported	BMP, GIF, JPEG, JPG, PNG
Video formats supported	ASF, AVI, FLV, H.264, H.265, HEVC, MKV, MOV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPG, TS, VOB, WMV, WMV3
High Dynamic Range (HDR) supported	No
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Tuner type	Analog & digital
Digital signal format system	DVB-C, DVB-S2, DVB-T2
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	50 W
Power consumption (standby)	0.5 W
Power consumption (typical)	27 W
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Stand type	Legs stand
Product color	Black
Panel mounting interface	100 x 200 mm
Package type	Box
Package depth	114 mm
Package width	811 mm
Package height	515 mm
Package weight	5600 g
Repairability index	6

Weight and Dimensions

Stand width	617 mm
Depth (with stand)	179 mm
Width (with stand)	721 mm
Height (with stand)	452 mm
Weight (with stand)	3900 g
Depth (without stand)	73 mm
Height (without stand)	430 mm
Weight (without stand)	3800 g